Choose your language:

Downloads

HPS50: ** N E W ** Handheld Personal SCOPE

PClab2000SE Oscilloscope & Generator interface software

Software package for our scope and function generator product range:
Version 3.1, released 25/05/2009:
** PCSU1000 and PCGU1000 drivers must be updated before using Version 3.1 **

PCSU1000:
Added Logic Analyzer functionality to display long sequences of digital data.
PCGU1000:
Added Waveform Repetition functionality to repeat one cycle of signal waveform with selectable interval time. Click "More Funct." button to get access to the interval time setting.
PCGU1000, PCG10, K8016:
Added an option to normalize the magnitude of the Bode Plot by the input magnitude of the device under test.
Added "Audio Range 30kHz" View option to the Bode Plotter to measure the frequency response of audio equipment.

PCSGU250: PC Scope and function generator combi (USB)

PcLab2000-LT software for our NEW two channel oscilloscope, spectrum analyser, recorder, function generator and bode plotter combination.

  • pclab2000lt_rev_1_06.zip
    Version 1.06 of the PCLab2000LT software package for PCSGU250:
    Release notes:
    - Fine tune adjustment bug fixed.
    - Bode Plotter accuracy improved.
    - Added an option to normalize the magnitude of the Bode Plot.
    - Added "Audio Range 30kHz" View option.
  • pcsgu250_drivers.zip
    Device drivers for Windows 2000/XP/Vista. Also tested with Windows 7 beta, build 7000.
  • pcsgu250_dll_rev1.zip
    Software development kit for PCSGU250, DLL with examples.

K8048 (=VM111) AND K8076 (=VM134) PIC programmers for experimental use.

PICprog2009: PIC programmer interface software for our K8048 (=VM111) and K8076 (=VM134).
Please read the PIC selection box for supported PIC controllers !
(the old K8048's ProgPIC software will not longer be upgraded)
Rev 3.0.0.3 : Added PIC12F508,PIC12F509,PIC16F57

VM151 RGB Controller configurator software

Allows control of the VM151 RGB controller with RF remote via the PC.
VB6 source code supplied. For use with K8074 USB to RF remote control transmitter.
Tooltip shows string to send in case you want to write your own application.
Freeware. Supplied as-is. No guarantees made, no responsabilities taken.

VelBUS home automation system

K8074: USB to RF remote control - Transmitter

The transmitter works together with our K8056 card, equipped with an RX433N receiver module.
Also our K8070 / VM119 one channel receiver can be used.

  • k8074_software_rev2.zip
    K8074 Communications Library package, Rev 2.
    function calls for the K8074 with demo applications and source code in Delphi and .NET (C#).
    Incl. *.INF driver files for Windows2000,XP and Vista.

VM142: Mini PIC PLC application module.

You can download MPLAB(tm) from www.microchip.com
MikroBasic(tm) can be downloaded from www.mikroe.com

K8061/VM140: extened USB interface board

Advanced Computer Interface board: software and examples.

  • k8061_vistapack_2007v1.zip
    You can use this software package with Windows XP and Windows Vista.
    Code for VB6,VB.NET,VB express edition 2005,Borland C++ builder,Visual C++,VC6,VC2005,Delphi.
  • k8061_software.zip
    Standard included software package 1.0

K8055/VM110: USB EXPERIMENT INTERFACE BOARD

Software development utilities and examples:

PPS10: 10MS/s PERSONAL POCKET SCOPE

K8056: 8 CHANNEL REMOTE RELAY CARD

APS230: 2 Channel ADVANCED PERSONAL SCOPE 240MS/s

Software for our DMX related kits

  • k8039.zip
    Utility for easy setup of your K8039 DMX address setting
    (VB runtime files required)
  • k8072_dipswitch_wizard.zip
    Utility for easy setup of your K8072 DMX address setting
    (VB runtime files required)

K8063: 2 MODULAR DIGITS WITH SERIAL INTERFACE

The K8063demo.exe and source code allow you to test your assembled K8063 units.
Furthermore, it is a handy tool to help you determine the sum of the segment values.

The Score.exe and source code is a simple program which allows you to keep the score of a two-team game (00-00).

K8048: PIC Programmer & Experiment board

Rev 2.6 supports the following microcontrollers:
PIC12F629, PIC12F675
PIC16C83, PIC16CR83, PIC16F83, PIC16C84, PIC16CR84,PIC16F84, PIC16F84A
PIC16F870, PIC16F871, PIC16F872, PIC16F873, PIC16F873A,
PIC16F874,PIC16F874A, PIC16F876, PIC16F876A, PIC16F877(A)(ICSP only)
PIC16F627, PIC16F627A, PIC16F628, PIC16F628A, PIC16F648A
PICF630, PIC16F676
PIC16F818, PIC16F819

  • k8048_2_3_2.zip
    Assembler, Programmer and datasheets. Full package!

    Update Rev 2.3.2
  • k8048_update_2_6.zip
    This ZIP file is an update for your existing version of PROGPIC2 software.
    Unpack and copy these files over your existing files.
    Important for WinXP SP2 users: file handling bug fixed!

VM112: Personal ANIMATED BADGE

K8067: Universal temperature sensor.

VB6 Demo software and source code for use with K8055/VM110 interface card.
Read temperatures and use them in your applications.

K8046: User-definable 8 channel TOUCH PANEL

MK158: LCD mini MESSAGE BOARD with backlight

  • mk158.zip
    RS232 interface software for easy message uploading and displaying

K8062: (=VM116) USB CONTROLLED DMX INTERFACE

The K8062 (= assembled version VM116) is an USB connected DMX lighting controller.
DMX is a standard protocol for lighting equipment. You can use DMX to control light equipment remotely. DMX can be used to control dimmers, colour scrollers, scanners, strobes, projectors, smoke machines and many other stage equipment.

HPS40: PERSONAL SCOPE

HPS40 software
Allows you to download HPS40 screens via the serial link to your computer for use in documents, presentations etc. Initial beta version for testing purposes. Some parts/functions are not functional yet or might not work correctly. Freeware supplied 'as-is'. No guarantees are made, no responsibilities are taken. Feel free to send comment/suggestions/bug reports to md@velleman.be.
Complete package with Visual Basic runtime files.

K8045: PROGRAMMABLE MESSAGE BOARD with LCD serial interface

Allows you to send messages to the K8045 and enables you to display messages.
This is free software, supplied 'as-is'. No guarantees are made, no responsabilities are taken. Source code is supplied for those who would like to customize/improve the routines. Feel free to send your comment/remarks/bug reports to md@velleman.be

K8005: STEPPER MOTOR CARD

K8005NT:
This is third party software supplied 'as-is' which should work under Win NT.
For advanced users. Make sure to read and understand supplied readme-file.

K8000: COMPUTER INTERFACE BOARD

Digital oscilloscope software

This is software for our obsolete scope devices: K7103/PCS32/PCS64I and generator K8016, that runs in Windows 95/98/ME/2000/XP and NT4. The program contains an oscilloscope, spectrum analyzer, a recorder and function generator software.
Rev 1.25 09/03/2008 :
- You may enter any LPT port address in hex form.
This is needed when a parallel port PCI card is used.
- Sweep frequency bug fixed.